Footpeg transport mounts
Bike on the trailer in 20 seconds. No straps.
Steel mounts for your footpegs. Slide on, pull the lever, lock and go.
01 Order
Choose your variant
Both sets have the same mounts and the same chains. The difference is the anchors for the trailer floor.
For a trailer without ready tie-down points.
- 2 mounts with chain and carabiner
- 2 lock pins with split pins
- 2 floor anchors and 4 M10 bolts
€179
Free delivery. Price includes 23% VAT.
Delivery
DPD courierDelivery to the address given at payment, anywhere in the EU.
Total €179. Pay by card, Apple Pay, Google Pay, Klarna or bank transfer.
Looking for a replacement part? Footpeg inserts. Before first use, read the installation and user manual.
02 Use
Three moves
01
Slide the mount onto the footpeg
The mount is chained to the trailer floor. Slide it on so that the footpeg sits in the upper window.
02
Pull the lever
The lever tightens the chain and pulls the bike down to the trailer floor, no tools needed.
03
Insert the lock
A lock pin with a split pin keeps the mount on the footpeg for the whole trip.
03 Fitment
Compatibility
Fits every motorcycle whose footpeg is more than 35 cm above the ground. If you are not sure, write to us before you order and we will check it together.
04 Data
Specifications
| Mount material | Laser-cut sheet steel |
|---|---|
| Steel thickness | 6 mm |
| Finish | Powder coating |
| Pocket insert | ASA plastic |
| Chain | Grade G80, with carabiner, tension set by chain link |
| Chain length | 25 cm |
| Set weight | 1.8 kg |
| Mount dimensions | 35 x 55 mm |
| Maximum motorcycle weight | 160 kg |
| Footpeg height | More than 35 cm above the ground |
| Footpegs | Metal, with openings for the lock pin |
| Closure | Lock pin secured with a split pin |
| Floor anchor bolts | 4 pieces, M10, grade 8.8 |
| Drill for fitting through the floor | Ø 11 mm |
| Tightening torque | 49 Nm (M10, grade 8.8) |
| Production | Rzeszów, Poland |
| Warranty | Lifetime on steel parts, plastic inserts are a wear part |
Mounts, floor anchors, bolts and split pins next to a tape measure in centimetres.
05 Comparison
Straps, Pegworks, wheel chock
Indicative values for a typical enduro bike on a single-axle trailer.
| Parameter | Straps | Pegworks | Wheel chock |
|---|---|---|---|
| Time to secure | 3 to 5 min | 20 s | approx. 2 min, with straps at the rear |
| Securing on your own | Hard, someone has to hold the bike | Yes | Yes |
| Load on the suspension | Heavily compressed for the whole trip | Moderate, set by chain link | Depends on the rear straps |
| Loosening on the road | Frequent, straps need re-tightening | Rare, lock pin with split pin | Possible on the rear straps |
| Space on the trailer | No fixed parts | Two anchors in the floor | Chock bolted down permanently |
| Price | approx. €35 per set | from €159 | approx. €190 plus straps |
- Time to secure
Straps3 to 5 min
Pegworks20 s
Wheel chockapprox. 2 min, with straps at the rear
- Securing on your own
StrapsHard, someone has to hold the bike
PegworksYes
Wheel chockYes
- Load on the suspension
StrapsHeavily compressed for the whole trip
PegworksModerate, set by chain link
Wheel chockDepends on the rear straps
- Loosening on the road
StrapsFrequent, straps need re-tightening
PegworksRare, lock pin with split pin
Wheel chockPossible on the rear straps
- Space on the trailer
StrapsNo fixed parts
PegworksTwo anchors in the floor
Wheel chockChock bolted down permanently
- Price
Strapsapprox. €35 per set
Pegworksfrom €159
Wheel chockapprox. €190 plus straps
06 Support
Questions and answers
- Will the mount fit my motorcycle?
It fits every motorcycle whose footpeg is more than 35 cm above the ground, provided the footpeg is made of metal and has openings for the lock pin. If in doubt, write to us before you order.
- What about the suspension during transport?
The bike stands on its wheels and is held by the footpegs. The chain pulls it down so that the suspension is clearly compressed, but not bottomed out. You set the tension by choosing a chain link.
- Can I load the bike on my own?
Yes. You slide the mount onto the footpeg, pull the lever and insert the lock. You do not need a second person to hold the bike while tightening straps.
- How do I fix the mounts to the trailer?
The set with anchors includes two floor anchors and four M10 bolts. If your trailer floor already has tie-down points, take the set without anchors.
- What wears out?
The inserts in the mount pocket. They are a replacement part, sold separately and swapped without removing the mount.
- How do I pay and when will my parcel arrive?
Pay by card (including Apple Pay and Google Pay), Klarna, Przelewy24, iDEAL, Bancontact or EPS. We ship to every EU country: sets by DPD courier with free delivery, footpeg inserts by registered priority letter for €7.
- I need an invoice for my company.
The order form has an optional field for your company VAT ID. Enter it and the invoice will be sent to the email address you gave at payment.
- Can I return my order?
Yes, you have 14 days to withdraw from the contract without giving a reason.